Bulleit Banner

Conference Proceedings

  • Bulleit, W. M. “Engineers Shouldn’t Think Too Fast” SEI/ASCE Structures Congress 2013, American Society of Civil Engineers, Reston, VA.  On CD.
  • Bulleit, W. M. and Drewek, M. W. “Agent-Based Modeling and Simulation for Hazard Management,”  Construction Research Conference, 2012, American Society of Civil Engineers, Reston, VA. On CD.
  • Bulleit, W. M. “What Makes an Engineering Education an Engineering Education?” SEI/ASCE Structures Congress 2012, American Society of Civil Engineers, Reston, VA.  On CD.
  • Bulleit, W. M. and Adams, D. K. “Philosophy of Structural Building Codes,” SEI/ASCE Structures Congress 2011, American Society of Civil Engineers, Reston, VA.  On CD.
  • Bulleit, W. M. and Adams, D. K. “Philosophy of Structural Building Codes,” fPET-2010: 2010 Forum on Philosophy, Engineering & Technology, Colorado School of Mines, May 9-10, 2010, pp. 88-89.
  • Bulleit, W. M. “Uncertainty in the Design of Non-prototypical Engineered Systems,” fPET-2010: 2010 Forum on Philosophy, Engineering & Technology, Colorado School of Mines, May 9-10, 2010, pp. 55-56.
  • Yin, Y. J., Li, Y., and Bulleit, W. M. “Modeling of Snow Loads Using a Filtered Poisson Process,”14th Conference on Cold Regions Engineering, Duluth, MN, August 31 – Spetember 1, 2009..
  • Yin, Y. J., Li, Y., and Bulleit, W. M. “Simulation of Combination of Earthquake and Snow Hazards,” 2009 SEI/ASCE Structures Congress, Austin, TX, April 30 – May 2, 2009. (On CD-rom)
  • Yin, Y. J., Li, Y., and Bulleit, W. M. “Fragility Analysis of Wood-Frame Buildings Subjected to Earthquake and Snow Hazards,” 14th World Conference on Earthquake Engineering, Beijing, China, October 2008.
  • Li, Y., Yin, Y., Ellingwood, B. R., and Bulleit, W. M. “Uniform Hazard Versus Uniform Risk Bases for Perfromance-Based Earthquake Engineering of Light-Frame Wood Construction,” 4th International ASRANet Colloquium on Integrating Structural Analysis, Risk, and Reliability, Athens, Greece, June 2008.
  • Bulleit, W. M. “Wood Education in Civil Engineering:  The View from Lake Superior,” SEI/ASCE 2008 Structures Congress, Vancouver, B. C., April 24-26, 2008 (On CD-rom)
  • Li, Y. and Bulleit, W. M. “Performance-Based Design for Wood Residential Construction Subjected to Snow Loads,” SEI/ASCE 2008 Structures Congress, Vancouver, B. C., April 24-26, 2008 (On CD-rom)
  • Zekavat, S. A., Hungwe, K., Bulleit, W. M., “A Novel Integrated Class/Web-Based Curriculum for the Course ‘Introduction to Electrical Engineering for Non Majors’:  Progress Made – Lessons Learned,” IEEE Frontiers in Education 2007, Milwaukee, WI, Oct. 10 – 13, 2007
  • Drewek, M. W. and W. M. Bulleit, “Simulating Terrorism in a Community,” Proceedings of Agent2006:  Social Agents: Results and Prospects, Chicago, IL, September 21-23, 2006; available at http://www.agent2006.anl.gov/proc2006.html
  • Bulleit, W. M. “Reliability of Wood Connections Designed Using LRFD from NDS-2005,” Proceedings of the World Conference on Timber Engineering, Portland, OR, August 6-10, 2006 (On CD-rom)
  • Bulleit, W M. and Drewek, M. W., “Simulating Initial Conditions in Agent-Based Modeling”  Proceedings of Agent 2005: Generative Social Processes, Models, and Mechnaisms, Chicago, IL, October 13-15, 2005. Available at http://agent2005.anl.gov/proc2005.html.
  • Bulleit, W M. and Drewek, M. W., “An Agent-Based Model of Terrorist Activity”  Proceedings of NAACSOS 2005, North American Association for Computational Social and Organizational Science Annual Conference, South Bend, IN, June 26-28, 2005. (On CD-ROM).
  • Bulleit, W. M., "Reliability of Wood Connections Designed to ASCE 16", Proceedings of SEI/ASCE Structures Congress 2004, May 2004, ASCE Reston, VA, (on CD-ROM).
  • Yu, G., Rosowsky, D.V., and Bulleit, W.M.  “Reliability of Light-Frame Walls Subject to Combined Axial and Transverse Loads,”  Proceedings World Conference on Timber Engineering (WTEC 2002), Shah Alam, Malaysia, 2002, (On CD-ROM)
  • Bulleit, W. M., Rosowsky, D. V., Pang, W. C., and Yu, G.  “Behavior and Reliability of Light-Frame Wood Wall Systems,” Proceedings of the 2002 Structures Congress, Denver, CO. April 2002., ASCE, Reston, VA, pp. 335-336.
  • Bulleit, W.M. and Rosowsky, D.V.  "Load Duration Effects in Wood Members and Connections: Order Statistics and Critical Loads," Proceedings: International Conference on Structural Safety and Reliability, ICOSSAR '01, Newport Beach, CA, June 2001, (On CD-ROM).
  • Rosowsky, D.V., Bulleit, W.M., Yu, G. and Pang, W.C.  "System Reliability Analysis
    Model for Wood Walls Subject to Combined Loads," Proceedings: International Conference on Structural Safety and Reliability, ICOSSAR '01, Newport Beach, CA, June 2001 (On CD-ROM).
  • Bulleit, W. M.  “Stochastic Damage Models for Wood Structural Elements,” Proceedings of the 2001 Structures Congress, Washington, D. C., May 2001,   (On CD-ROM)  
  • Bulleit, W. M., Martin, Z. A., and Marlor, R. A., "Load Duration Behavior of Steel-Doweled Wood Connections," Proceedings World Conference on Timber Engineering, Dept. of
    Wood Science, University of British Columbia, Vancouver, B. C., Paper No. 2.4.3,
    (on CD-ROM), 2000.
  • Bulleit, W. M. and Drewek, M. W., "Analysis of Wood-Peg Connected Timber Frames,"
    Structural Engineering in the 21st Century, ASCE, 1999, pp. 654-657.
  • Bulleit, W. M., "Correlation Structure of Two Lumber Properties," Structural Engineering in the  21st Century, ASCE, 1999, pp. 675-678.
  • Bulleit, W. M. and Rosowsky, D. V., "Reliability Analysis of Light-Frame Walls Subjected  to Wind Loads," Structural Engineering World Wide, Elsevier, Paper No. T206-2  (on CD-ROM), 1998.
  • Bulleit, W. M., Sandberg, L. B., O'Bryant, T. L., Weaver, D. A., and Pattison, W. E.,  "Analysis of Frames with Traditional Timber Connections," Proceedings of the  International Wood  Engineering Conference, Vol. 4, Omnipress, Madison, WI, 1996, pp. 232-239.
  • Sandberg, L. B., Bulleit, W. M., O'Bryant, Postlewaite, J. J., Schaffer, J. J., "Experimental
  • Evaluation of Traditional Timber Connections," Proceedings of the International  Wood
     Engineering Conference, Vol. 4, Omnipress, Madison, WI, 1996, pp. 225-  231.
  • Bulleit, W. M. and Liu, W.-F., "System Factors Using First-Order Reliability Methods,"
    Building an International Community of Structural Engineers, Vol.2, ASCE, 1996, pp. 786-791.
  • Bulleit, W. M. and Decator, D. B., "Reliability Analysis of Bolted Wood Connections,"
     Probabilistic Mechanics and Structural Reliability, ASCE, 1996, pp. 326-329.
  • Bulleit, W. M. and Liu, W.-F., "First-Order Reliability Analysis of Wood Structural Systems,"  Engineering Mechanics, Vol. 1, ASCE, New York, NY, 1995, pp. 333- 336.
  • Bulleit, W. M. and Sandberg, L. B., "Behavior of Traditional Timber Joinery,"  Proceedings of
     the Timber Framers Guild of North America, 11th Annual Conference, 1995, pp. 30-32.
  • Bulleit, W. M. and Liu, W.-F., "Effect of Systems Approach on Structural Reliability," Systems  Approach to Wood Structures, Forest Products Society, Madison, WI, 1994, pp. 9-14.
  • Bulleit, W. M., "Wood Combined with Other Materials," Wood Products for Engineered
    Structures, Forest Products Society, Madison, WI, 1993, pp. 44-46.
  • Bulleit, W. M. and Steinberg, E. P., "Reliability Analysis of Lunar Structures Under Meteoroid Impact," Probabilistic Mechanics and Structural and Geotechnical ReliabilityASCE, New York, NY, 1992, pp. 9-12.
  • Bulleit, W. M., "Reliability-Based Design of Wood Structural Systems," Proceedings of the 1991 International Timber Engineering Conference, Vol. 2, TRADA, 1991, pp. 417-423.
  • Bulleit, W. M., "Reliability-Based Design of Wood Structural Systems," Proceedings of the  Ninth ASCE Structures Congress, ASCE, 1991, pp. 235-238.
  • Steinberg, E. P. and Bulleit, W. M., "Design for Meteoroid Impacts Using Reliability Theory,"  Proceedings of the Ninth ASCE Structures Congress, ASCE, 1991, pp. 92-95.
  • Bulleit, W. M. and Rintala, J. E., "Statistical Properties of Prestressed Concrete Beams in Shear,"  Structural Safety and Reliability, Vol. III, ASCE, 1990, pp. 2091-2094.
  • Bulleit, W. M. and Vacca, P. J., Jr., "Lifetime Behavior of Wood Structural Systems," Structural Safety and Reliability, Vol. III, ASCE, 1990, pp. 2075-2078.
  • Bulleit, W. M. and Yates, J. L., "Stochastic Finite Element Analysis of Metal Plate Connected  Wood Trusses," Structural Safety and Reliability, Vol. II, ASCE, 1990, pp. 1153-1160.
  • Steinberg, E. P. and Bulleit, W. M., "Development of Design Criteria for Lunar Structures," Proceedings of Space 90, Engineering, Construction and Operations in Space II, ASCE, 1990, pp. 500-509.
  • Bulleit, W. M. and Vacca, P. J., Jr., "In-Time Behavior of Wood Structural Systems,"
    Proceedings of the Second Pacific Timber Engineering Conference, Vol. 1, Auckland, New Zealand, August 28-31, 1989, pp. 203-206.
  • Bulleit, W. M. and Yates, J. L., "Stochastic Behavior of Metal Plate Connected Wood Trusses,"Proceedings of the Second Pacific Timber Engineering Conference, Vol. 2, Auckland, New Zealand, August 28-31, 1989, pp. 53-56.
  • Bulleit, W. M., "Experiences with a Markov Model for Structural Systems with Time Variant Member Resistances," New Directions in Structural System Reliability, Proceedings of a NSF workshop held in Boulder, CO, September 12-14, 1988, University of Colorado, Boulder, CO, January 1989, pp. 78-87.
  • Bulleit, W. M. and Yates, J. L., "Stochastic Finite Element Analysis of Metal Plate Connected Wood Trusses," Proceedings of the 1988 International Conference on Timber Engineering, Vol. 1, Seattle, WA, September 19-22, 1988, pp. 125-131.
  • Bulleit, W. M. and Vacca, P. J., Jr., "Lifetime Reliability of Wood Structural Systems,"
    Proceedings of the 1988 International Conference on Timber Engineering, Vol. 2, Seattle, WA, September 19-22, 1988, pp. 37-43.
  • Bulleit, W. M., "Lifetime Reliability of Wood Structural Systems," Probabilistic Methods in Civil Engineering, ASCE, May, 1988, pp. 173-176.
  • Hamann, R. A. and Bulleit, W. M., "Reliability of Prestressed High Strength Concrete Beams in Flexure," Proceedings of ICASP5, the Fifth International Conference on Applications of Statistics and Probability in Soil and Structural Engineering, Vancouver, B.C., Canada, May 25-29, 1987, pp. 141-147.
  • Bulleit, W. M., "Models for Fiberglass Reinforced Particleboard in Flexure," Proceedings of the Fifteenth Washington State University International Symposium on Particleboard, Pullman, Washington, 1981, pp. 289-308.